interSeptor Environmental Monitoring System
"Ridiculously inexpensive; up and running in less than ten minutes; simple, clear graphical display of real-time and historical data." - Techworld
  interSeptor is a full-featured, scaleable network environmental monitoring device designed to remotely monitor temperature, humidity and other environmental conditions in data centres, IT rooms and racks. Email and SNMP alerts are available as standard, but combined with our unique Alert Centre facility (UK), interSeptor can also provide automated telephone voice and text alerts 24/7 to give early-warning of impending computer room problems.
Designed for ‘out-of-the-box’ operation, interSeptor is supplied with a dual temperature/humidity sensor, with a second temperature/humidity sensor available also. A range of optional ‘Go-Probe’ sensors to detect security breaches, power failures, smoke and water leaks can also be quickly added to the interSeptor system to provide comprehensive monitoring of your critical environments.
Features of the interSeptor include:
- Temperature/humidity sensor and 2 x Go-Probe sensor ports
as standard
- Monitoring via web browser interface and/or network management
system
- User configurable high/low warning and critical temperature/humidity thresholds
- Optional Go-Probe Sensors (water, smoke, security, power)
can be quickly connected
- Email/SNMP alarm notification
- Daily status reporting
- Automated Voice and SMS text alarm notification via Jacarta Alert Centre (UK Only). Free first year subscription now available with all
new UK purchases of interSeptor (just £165p.a. thereafter). More...
- Extensive on-board logging/graphing capability
- Comprehensive browser interface
- SNMP compliant for network management system integration. MIB available
- Serial, telnet, browser configuration options
- BootP, DHCP
- Alarm scheduling facility so that alerts can be enabled/disabled
as required
- 2 year warranty
- Easy purchase via our extensive network of Authorised Resellers and Platinum Partners
interSeptor is supplied with a temperature/humidity sensor as standard with 2m interface cable. 2 x optional Go-Probe sensors can be connected to the temperature/humidity sensor and monitored via the interSeptor. interSeptor also has the capacity to monitor an additional temperature/humidity sensor. A further 2 x Go-Probe sensors can also then be connected. Our unique interSeptor design ensures cabling runs for smoke, water, security and power sensors can be minimised. Various interface cable lengths are available as required.
SENSORS
interSeptor optional sensors are available as follows:
Temperature/Humidity
High and low warning and critical temperature and humidity thresholds
can be configured in the interSeptor to ensure alarms are raised when
room or rack conditions are abnormal. The hysteresis configuration facility
ensures that alarms are not continually triggered when levels are ‘floating’ around
the configured thresholds. |
 |
Water Leak
The interSeptor water leak sensor is supplied with 3m or 18m of leak
detection cable. The cable can be run under air conditioning
units, in ceiling voids, under raised floors, under pipes, and around
room perimeters to provide a comprehensive, easy-to-install, leak detection
facility. |
 |
Smoke
The unique sensor connectivity design of the interSeptor facilitates
installation and monitoring of the smoke detector, especially on ceilings.
The cable connection need only be run from the temperature/humidity sensor
which will typically already be installed at an elevated level. |
 |
Security
The security sensor option is a magnetic reed contact sensor, ideal
for monitoring rack or room door access. |
 |
Power
The power sensor will detect the presence or otherwise of utility power. |
 |
Universal
The Universal sensor is an interface cable that can be connected to
any device offering an open or closed or high/low output. interSeptor
can monitor this output for changes in state and alarm accordingly. The
Universal sensor can be connected to equipment such as generators, air
conditioning units, printers, UPS, security systems, fire alarm systems,
etc. |
 |
SOFTWARE
Browser
interSeptor can be monitored and managed ‘out-of-the-box’ via
its comprehensive browser interface.
Key features include:
- Visual ‘comprehensive’ interface for quick identification
of temperature/humidity or sensor alarms
- Straightforward labelling of sensors to identify location
and type of sensor
- Quick configuration of alarm thresholds, email recipients,
trap receivers, system information
- Viewing of extensive event and detail files, all of which
can be exported in .csv format into excel, etc.
Java
A java window can be launched via the interSeptor browser interface
to display real-time meters or graphs for each sensor being monitored,
as well as for historial and extended historical data recorded by the
interSeptor.
Network Management
interseptor can be integrated into network management systems supporting
SNMP, such as WhatsUp Gold and HP Openview.
Download interSeptor Literature
Click here to view Jacarta products online
View Specification
Where to buy
For products featuring additional sensor capacity, please click here
Click here to enquire about this product or to find out where to buy. Alternatively, please call us on +44 (0) 1672 511125.
|
